Elevator and lift load control system, new and modernized lifts, easy to install, reliable and with good sale price.

Load weighing devices for elevators (load control)
DS Europe load control systems are measuring the load in the elevator cabin by means of transducers that measure the rope tension, the car/beam strain, the hydraulic pressure and the weight in the cabin.
Digital electronics mod. 699 is connected to the transducers and controls the load by means of its alarm levels with relays outputs.
DS Europe load weighing devices can be used to feed the load value to the inverter, controlling the winch, for optimal cabin pre torque control at brake release as well as for velocity control.
DS Europe load control systems can be installed on new and modernized elevators (traction, MRL, domus lifts, hydraulic types etc.) because they are easy to install, reliable and with good sale price.

Single rope load weighing device for lifts. ROPE LIFTSENTRY allows to measure and to control the load on wire ropes (and ribbons) of elevators.
Transducers mod. OT are fixed onto the single ropes and electronics mod. 699 shows the load on display and controls It with alarm levels.

Load weighing device for elevator beams and cars Digital Liftsentry allows ot measure and control the load on elevators and goods lifts.
Digital Liftsentry is easy to install, reliable and with its good price is fit for installation on new and modernized elevators.
Digital Liftsentry measures the load in the cabin by measuring car and beam flexion strain proportional to the load in the cabin.
Electronics mod. 699 is connected to a transducer: mod. 942 transducer for cars and beams, mod. LT load cell for weighing below car or LP662 pressure transducer for hydraulic lifts.
Electronics mod. 699 and controls the load by means of its alarm levels with relays outputs.

Elevator load weighing devices for ropes. Multirope system allows to measure and control the load on traction elevators and goods lifts with ropes.
Multirope is easy to install, reliable and with its good price is fit for installation on new and modernized elevators.
Multirope measures the load in the cabin by measuring the ropes tension with MRL transducer.
Electronics mod. 699 is connected to MRL transducer and controls the load by means of its alarm levels with relays outputs.
MRL sensor can have a built-in optional electronics.

Home | Company | Contact | Download | Versione italiana


Single rope load weighing device for lifts.	ROPE LIFTSENTRY allows to measure and to control the load on wire ropes (and ribbons) of elevators. Transducers mod. OT are fixed onto the single ropes and electronics mod. 699 shows the load on display and controls It with alarm levels.